ESI4000

EMU ESI-4000: Setup of SPDIF Output

MIDI & MULTIMODE

SPDIF and FX can also be utilized but are not separate busses and cannot be used to expand the number of discrete outputs. In the case of a multiple output setup, SPDIF or FX would be used as an alternative to the analog Main Output bus. This is an advanced configuration which is explained later in the SPDIF/FX section.

SETTINGS CONFIGURATION

MASTER/SPECIAL/OUTPUT FORMAT —
Main Output Format: analog

MASTER/MIDI/MULTIMODE ENABLE —
Boot in Multi: yes
Use Bank State: no

MASTER/MIDI/MIDI MIX —
Change the bottom lines from ‘zzzz zzzz zzzz zzzz’ to ‘M123 zzzz zzzz zzzz’ (for 4 stereo busses) or ‘MM11 2233 zzzz zzzz’ (for 8 mono outputs).

Tags

ESI4000: Maximizing your ESI

Whether you use your ESi sampler by itself or in a studio full of gear, you probably want to make the most use out of it. E-mu pretty much just offers the Turbo Kit as an upgrade option, but a lot more can be done to maximize your sampler. Here is a list of upgrades that you'll probably want to get if you haven't already:
 

Tags

EMU ESI4000: RAM Specs

 

The ESI4000 = uses72 pin SIMM4Q, SIMM16Q, or SIMM64E – 8 or 9 bit 70uS or faster – stock machine has one SIMM 4 (4meg) – there are only 2 SIMM slots!

4 meg = (1) Simm4Q
8 meg = (2) Simm4Q
16meg = (1) Simm16Q
20meg = (1) Simm 16Q and (1) Simm4Q
32meg = (2) Simm16Q
64meg = (1) SIMM64E
72meg = (1) simm16Q and (1) SIMM64E
128meg = (2) SIMM64E

 

 

Tags
Subscribe to ESI4000

Copyright 2018· All rights reserved